Products
Product
Hotline:
Email:
Address:
15-17 Floor, G1 Building, Zhongjian Optical Valley Star, No 797 Gaoxin Avenue, East Lake High-tech Development Zone, Wuhan city Hubei Province China.
Coverall ZPC2011 Type 3B/4B/5B/6B
To ensure the hygiene and safety of products, Zonsen established more than 8000 square meters of Class D clean workshop and used advanced automatic production equipment, which are used for the production of face mask, wet wipes, disinfection wipe, protective clothing, operating kits, and other products.
Category:

Hotline:
Introduction
Description:
Guardwe® Protective Coverall is designed to help protect against certain light liquid splashes(Type6), hazardous dusts (Type5), liquid chemicals (Type4), liquid tight chemicals(type3) and infective agents(EN14126). It is manufactured from a yellow film laminated to a white nonwoven fabric (90 gsm) with stitched and over-taped yellow seams. The hooded coverall has a 2-piece hood with an elasticated facial opening and a self-adhesive chin flap, elasticated cuffs, ankles and waist (back),with thumb loops. The front 2-way zipper is covered by two flaps, each with integral self-adhesive tape. The coverall is available in seven nominal sizes (S-XXXXL).
Standard(s):
Type 3 EN 14605:2005+A1:2009
Type 4 EN 14605:2005+A1:2009
Type 5 EN ISO 13982-1:2004+A1:2010
Type 6 EN 13034:2005+A1:2009
Type 3B/4B/5B/6B EN 14126:2003+AC:2004
EN 14325:2018
EN 1149-5:2018
EN 1073-2:2002
Test Results
Performance of whole suit |
||||||||||
Test |
Requirement |
Result/Class/Conformity |
||||||||
Type 3: EN 14605 |
|
Pass |
||||||||
Type 4: EN 14605 |
|
Pass |
||||||||
Type 5: EN ISO 13982-1 |
Ljmn,82/90 ≤30%; Ls,8/10 ≤15% |
Pass |
||||||||
Type 6: EN 13034 |
|
Pass |
||||||||
EN 1073-2 |
Class 1:TILE =30%; TILA =20%; NPF =5 |
Class 1 |
||||||||
Electrostatic properties (EN 1149-5) |
Max. 2.5*109Ω on at least one surface |
Pass
|
||||||||
Seam strength (EN ISO 13934-2) |
Class 4 > 125N |
Class 4 |
||||||||
Abrasion resistance (EN ISO 12947-2) |
Class 6 > 2000rubs |
Class 6
|
||||||||
Puncture resistance(EN 863) |
Class 2 > 10N |
Class 2 |
||||||||
Flex cracking resistance(EN ISO 7854, Method B) |
Class 6 > 50000cycles |
Class 6 |
||||||||
Flex cracking resistance at low temperatures(EN ISO 7854,Method B) |
Class 6 > 40000cycles |
Class 6 |
||||||||
Tensile strength (EN ISO 13934-1) |
Class 2 > 60N |
Class 2 |
||||||||
Tear resistance (trapezoidal) (EN ISO 9073-4) |
Class 3 > 40N |
Class 3 |
||||||||
Resistance to blocking |
At least Class 1-blocking |
Class 2-No blocking |
||||||||
Resistance to permeation by liquids(ISO 6529, method A)-EN 14605 |
Class 6 > 480min |
|
||||||||
Repellency by liquids(EN ISO 6530)-EN 13034 |
Class 3 > 90% |
|
||||||||
Resistance to penetration by liquids(EN ISO 6530)-EN 13034 |
class 3 < 1% |
|
||||||||
Resistance To Penetration Of Infective Agents-EN14126 |
||||||||||
Resistance to Penetration by Blood-Borne Pathogens- test method using Phi-X174 Bacteriophage (ISO 16604) |
Class 2: 1.75kPa |
Class 2 |
||||||||
Resistance to Wet Microbial Penetration (ISO 22610) |
Class 4: 45min < t ≤60min |
Class4 |
||||||||
Resistance to Liquid Aerosol Penetration (ISO/DIS 22611) |
Class 3: log > 5 |
Class 3 |
||||||||
Resistance to Dry Microbial Penetration(ISO 22612) |
class 3: log cfu≤1 |
Class 3 |
||||||||
EN ISO 13688:2013 |
||||||||||
pH |
3.5-9.5 |
Pass |
||||||||
Azo Dyes(EN ISO 14362-1) |
ND |
Pass |
Material: 90g PP+PE
Color: yellow
Model: ZPC2011( without knee pads)
ZPC2011A( with knee pads)
Size:S-4XL
Keywords:
Previous:
Related products